Specifications

show interfaces
151
Item Displayed information
Detailed information Meaning
Output rate
#3
Displays the send throughput of the line (in bps and pps) for the one second
interval before the command was executed, rounded to two decimal places.
The frame length used to calculate bps value starts from the MAC header and
ends with the FCS field.
Input rate
#3
Displays the receive throughput of the line (in bps and pps) for the one second
interval before the command was executed, rounded to two decimal places.
The frame length used to calculate bps value starts from the MAC header and
ends with the FCS field.
Flow control send
#4
on
A pause packet is sent.
off
A pause packet is not sent.
Flow control receive
#4
on
A pause packet is received.
off
A pause packet is not received.
TPID Displays a TagProtocolIDentifier value that is used on the port to
identify the VLAN. (8100 fixed)
Frame size
#5
Displays the maximum frame length of a port in octets.
The maximum frame length is calculated starting from the MAC header and
ending with the DATA/PAD field. For details about frame formats, see the
description of frame formats in 13.1.3 Control on the MAC and LLC sublayers
in the Configuration Guide Vol. 1.
Interface name Displays the name of the interface assigned to the port.
Description:<Supplementary
explanation>
Displays the contents of the Description configuration.
The Description configuration can be used to set comments, such as a
comment about the purpose of the port.
Statistics Category
<Out octets/packets
counter>
Send statistics
<In octets/packets
counter>
Receive statistics
<Out line error counter>
Send error statistics
#7
<In line error counter>
Receive error statistics
<Line fault counter>
Failure statistics
<Uplink redundant>
Statistics for uplink redundancy
#9
Detailed
statistical
items for
sending and
Octets
The number of octets
All packets
Number of packets (including error
packets)