Specifications

show interfaces
148
Item Displayed information
Detailed information Meaning
<port status>
active up
Running
active down
Stopped
inactive
#1
The port is in the inactive status.
The following can cause a port to become
inactive:
 Operation stopped by the
inactivate command.
 Due to standby link function of link
aggregation
 Due to the BPDU guard functionality of
the Spanning Tree Protocol
 The storm control functionality
 Detection of a unidirectional link failure
by the UDLD functionality
 The L2 loop detection functionality
disable
Operation was stopped by using the
shutdown or
schedule-power-control shutdown
interface configuration command.
<line type>
1000BASE-T full(auto)
100BASE-T full duplex
(Line type determined by auto-negotiation.)
100BASE-FX full [AX1250S] 100BASE-FX full duplex
100BASE-FX full(auto) [AX1250S]
#2
100BASE-FX full duplex
1000BASE-LX full
1000BASE-LX full duplex
1000BASE-SX full
1000BASE-SX full duplex
1000BASE-SX2 full
1000BASE-SX2 full duplex
1000BASE-LH full
1000BASE-LH full duplex
1000BASE-LX full(auto)
1000BASE-LX full duplex
(Line type determined by auto-negotiation.)
1000BASE-SX full(auto)
1000BASE-SX full duplex
(Line type determined by auto-negotiation.)
1000BASE-SX2 full(auto)
1000BASE-SX2 full duplex
(Line type determined by auto-negotiation.)