Specifications

show interfaces
138
1024-1518 packets : 0 1024-1518 packets : 0
<Out line error counter> 
Late collision : 0 Defer indication : 0|
Single collision : 0 Excessive deferral : 0|4
Multiple collisions : 0 Excessive collisions : 0|
Error frames : 0 
<In line error counter> 
CRC errors : 0 Symbol errors : 0|
Alignment : 0 Fragments : 0|5
Short frames : 0 Jabber : 0|
Long frames : 0 Error frames : 0
<Line fault counter> 6
Link down : 0 
<Uplink redundant> 
Switchport backup pairs Preemption Flush |7
Primary Status Secondary Status Delay Limit VLAN |
Port 0/13 Forwarding Port 0/14 Blocking 30 - 11 
>
1. Summary port information
2. Detailed port information
3. Send and receive statistics
4. Send error statistics
5. Receive error statistics
6. Failure statistics
7. Uplink redundancy statistics
Display items in Examples 1 and 2 [AX1250S][AX1240S]
The following table describes the display items for the detailed information and statistics for
10BASE-T/100BASE-TX.
Table 13-1 Display of summary information for 10BASE-T/100BASE-TX
Item Displayed information
Detailed information Meaning
Port<IF#>
Port number
<port status>
active up
Running
active down
Stopped
inactive
#1
The port is in the inactive status.
The following can cause a port to become inactive:
 Operation stopped by the inactivate
command.
 Due to standby link function of link
aggregation
 Due to the BPDU guard functionality of the
Spanning Tree Protocol
 The storm control functionality
 Detection of a unidirectional link failure by the
UDLD functionality
 The L2 loop detection functionality