Specifications

show interfaces
137
<Out line error counter> 
Late collision : 0 Defer indication : 0|
Single collision : 0 Excessive deferral : 0|4
Multiple collisions : 0 Excessive collisions : 0|
Error frames : 0 
<In line error counter> 
CRC errors : 0 Symbol errors : 0|
Alignment : 0 Fragments : 0|5
Short frames : 0 Jabber : 0|
Long frames : 0 Error frames : 0
<Line fault counter> 6
Link down : 0 
<Uplink redundant> 
Switchport backup pairs Preemption Flush |7
Primary Status Secondary Status Delay Limit VLAN |
Port 0/13 Forwarding Port 0/14 Blocking 30 - 11 
>
1. Summary port information
2. Detailed port information
3. Send and receive statistics
4. Send error statistics
5. Receive error statistics
6. Failure statistics
7. Uplink redundancy statistics
Example 2 [AX1250S][AX1240S]
The following shows an example of displaying the 10BASE-T/100BASE-TX interface
information, the detailed port information, and the detailed statistics.
Figure 13-2 Execution result when the detailed statistics for 10BASE-T/100BASE-TX is
specified
> show interfaces fastethernet 0/13 detail
Date 2008/11/17 11:50:51 UTC
Port 0/13 : active up 100BASE-TX full(auto) 00ed.f201.010d <-1
PoE status: on Class: 2 Priority: high 
Time-since-last-status-change: 00:00:31 |
Bandwidth: 100000kbps Average out: 1Mbps Average in: 1Mbps |
Peak out: 1Mbps at 11:50:50 Peak in: 1Mbps at 11:50:31 |
Output rate: 5.5kbps 3pps |
Input rate: 0bps 0pps |2
Flow control send : off |
Flow control receive: off |
TPID: 8100 |
Frame size: 1518 Octets Interface name: fastether0/13 |
Description: 
<Out octets/packets counter> <In octets/packets counter> 
Octets : 5712 Octets : 1624|
All packets : 44 All packets : 16|
Multicast packets : 3 Multicast packets : 1|
Broadcast packets : 38 Broadcast packets : 15|
Pause packets : 0 Pause packets : 0|3
64 packets : 8 64 packets : 4|
65-127 packets : 25 65-127 packets : 12|
128-255 packets : 11 128-255 packets : 0|
256-511 packets : 0 256-511 packets : 0|
512-1023 packets : 0 512-1023 packets : 0|