Specifications

show interfaces
136
show interfaces
Displays information about an Ethernet interface.
Syntax
show interfaces gigabitethernet <IF#> [detail] [AX2200S]
show interfaces {fastethernet | gigabitethernet} <IF#> [detail] [AX1250S] [AX1240S]
Input mode
User mode and administrator mode
Parameters
gigabitethernet [AX2200S]
Specifies a 10BASE-T/100BASE-TX/1000BASE-T or 1000BASE-X interface.
{fastethernet | gigabitethernet} [AX1250S][AX1240S]
fastethernet
Specify a 10BASE-T or 100BASE-TX interface.
gigabitethernet
Specify a 1000BASE-T, 100BASE-FX, or 1000BASE-X interface.
<IF#>
Specify an interface port number. For the specifiable range of values, see
Specifiable values for parameters.
detail
Specifies that detailed statistics be displayed.
Operation when this parameter is omitted:
Detailed statistics are not displayed.
Example 1 [AX1250S][AX1240S]
The following shows an example of displaying the 10BASE-T/100BASE-TX interface
information and the detailed port information.
Figure 13-1 Execution result when 10BASE-T/100BASE-TX is specified
> show interfaces fastethernet 0/13
Date 2008/11/17 11:50:46 UTC
Port 0/13 : active up 100BASE-TX full(auto) 00ed.f201.010d <-1
PoE status: on Class: 2 Priority: high 
Time-since-last-status-change: 00:00:26 |
Bandwidth: 100000kbps Average out: 1Mbps Average in: 1Mbps |
Peak out: 1Mbps at 11:50:46 Peak in: 1Mbps at 11:50:31 |
Output rate: 1.3kbps 2pps |
Input rate: 0bps 0pps |2
Flow control send : off |
Flow control receive: off |
TPID: 8100 |
Frame size: 1518 Octets Interface name: fastether0/13 |
Description: 
<Out octets/packets counter> <In octets/packets counter> 
Octets : 4490 Octets : 1624|
All packets : 36 All packets : 16|3
Multicast packets : 3 Multicast packets : 1|
Broadcast packets : 30 Broadcast packets : 15|
Pause packets : 0 Pause packets : 0