Specifications

show cpu
130
show cpu
Shows CPU usage.
Syntax
show cpu [days][hours][minutes][seconds]
Input mode
User mode and administrator mode
Parameters
days
Displays statistics collected daily.Statistics for the past 31 days are displayed.
hours
Displays statistics collected hourly. Statistics for the past day are displayed.
minutes
Displays statistics collected by the minute. Statistics for the past hour are displayed.
seconds
Displays statistics collected by the second. Statistics for the past minute are
displayed.
Operation when a parameter is omitted
This command displays only the information that meets the condition of the
specified parameters. If you do not specify a parameter, information for the
conditions specified by the parameter will not be displayed.
Operation when all parameters are omitted:
Displays statistics collected for a 5-second period.Statistics are overwritten every 5
seconds.
Example
Figure 12-1 Display example when all the parameters are specified
> show cpu days hours minutes seconds
Date 2009/03/12 09:31:56 UTC
*** Days ***
0 25 50 75 100[%]
Date Time CPU average CPU peak +----+----+----+----+
03/03 11:26:22-23:59:59 12 100 *** P
03/04 00:00:00-23:59:59 18 100 **** P
:
03/10 00:00:00-23:59:59 12 100 *** P
03/11 00:00:00-23:59:59 12 100 *** P
*** Hours ***
0 25 50 75 100[%]
Date Time CPU average CPU peak +----+----+----+----+
03/11 09:00:00-09:59:59 12 100 *** P
03/11 10:00:00-10:59:59 12 100 *** P
:
03/12 07:00:00-07:59:59 12 100 *** P
03/12 08:00:00-08:59:59 12 100 *** P
Date Time CPU average CPU peak +----+----+----+----+
*** Minutes ***