Specifications

ppupdate
126
ppupdate
Updates flash memory with new software that is copied from the memory card to the
RAMDISK, or that is downloaded via FTP or a similar method.
Syntax
ppupdate [test][no-display][-f] [no-reload] [ramdisk <File name>]
Input mode
Administrator mode
Parameters
test
Performs a check by simulating command execution. The software is not actually
updated.
no-display
Does not display the message output when the command is executed.
-f
Forces the processing without displaying confirmation messages when the
command is executed.
Operation when this parameter is omitted:
A confirmation message is displayed.
no-reload
When the update is complete, the device is not automatically restarted. Instead, the
device starts up with the new software next time the device is restarted.
ramdisk <File name>
Specifies the update file name.
Specify the file name with 64 or fewer characters. The file name is not case sensitive.
For the characters that can be specified, see Specifiable values for parameters.
Example
List the current software version and the new software version, and display a confirmation
message.
# ppupdate ramdisk k.img
Software update start
***********************************************
** UPDATE IS STARTED. **
***********************************************
old version a.a (Build:xx) <- Displays the old version.
new version b.b (Build:yy) <- Displays the new version.
Automatic reboot process will be run after installation process.
Do you wish to continue? (y/n): _
If you enter y, the update processing starts, and after it finishes, the device is
restarted automatically.
If you enter n, the update processing does not start, and you are returned to