Specifications

show logging
114
show logging
Displays the time operation log entries and messages were acquired. All acquired entries
are displayed in reverse chronological order.
Syntax
show logging [<command classification>] [search <string>]
Input mode
User mode and administrator mode
Parameters
<command classification>
-h
Displays log entries with no header information (System Information).
System Information indicates the device model and software information.
Operation when this parameter is omitted:
Log entries with header information (
System Information) are displayed.
search <string>
Specifies the search string.
If you specify this parameter, the operation or reference log messages that include
the search string are displayed.
Specify the string with 1 to 64 characters. The characters are case sensitive. For
details, see Any character string in Specifiable values for parameters.
Operation when this parameter is omitted:
All the operation log messages are displayed.
Operation when all parameters are omitted:
Operation proceeds as described for each Operation when this parameter is omitted
section.
Example
Figure 10-1 Displayed operation log (when the parameters are omitted)
> show logging
Date 2011/03/22 15:49:09 UTC
System Information
AX1240S-48T2C, OS-LT2, Ver. 2.3 (Build:yy)
#
Logging Information
Total Entry : 15
KEY INFO 11/03/22 15:49:09 console:show logging
EVT INFO 11/03/22 15:49:04 PORT Port 0/10 activated.
KEY INFO 11/03/22 15:49:04 console:activate fastethernet 0/10
RSP INFO 11/03/22 15:48:59 console: 0/5 is already active.
KEY INFO 11/03/22 15:48:59 console:activate fastethernet 0/5
EVT INFO 11/03/22 15:48:45 VLAN VLAN (1) Status is Down.
EVT INFO 11/03/22 15:48:45 PORT FastEthernet 0/11 Link Down
:
>