Specifications

format mc
102
format mc
Initializes formats the memory card for use by the Switch.
Syntax
format mc [-f]
Input mode
User mode and administrator mode
Parameters
-f
Executes the command without displaying a confirmation message.
Operation when this parameter is omitted:
A confirmation message is displayed.
Example
1. Insert the memory card to be initialized into the slot, and then enter the following
command:
> format mc Press the Enter key.
2. Display the message asking for confirmation at the start of format command
execution.
Do you wish to initialize memory card? (y/n): _
If y is entered, the memory card will be initialized.
If an error occurs, an error message is displayed.
If
n is entered, the memory card will not be initialized, and you will be returned to
administrator mode.
Display items
None
Impact on communication
None
Response messages
Table 9-1 List of response messages for the format mc command
Message Description
Can't execute. The command could not be executed. Re-execute the
command.
Can't gain access to MC. An attempt to access the memory card failed.
MC is not inserted. A memory card was not inserted.