Specifications

show power-control schedule
99
show power-control schedule
Display the current status of the power saving schedule and the dates and times the power
saving schedule has been enabled.
Syntax
show power-control schedule [<YYMMDD>] [count <Count>]
Input mode
User mode and administrator mode
Parameters
<YYMMDD>
The scheduled date and time is displayed from midnight of the day specified here.
The specifiable range of values is from January 1, 2000 to January 17, 2038.
YY
Specify the last two digits of the year in the range from 00 to 38.
For example, 00 means the year 2000.
MM
Specify the month in the range from 01 to 12.
DD
Specify the day of the month in the range from 01 to 31.
Operation when this parameter is omitted:
The scheduled date and time from the time of command execution is
displayed.
count <Count>
Scheduled dates and times equivalent to the number of specified schedules are
displayed. The specifiable range of schedules is from 1 to 50.
Operation when this parameter is omitted:
The scheduled dates and times for 10 schedules are displayed.
Operation when all parameters are omitted:
Operation proceeds as described for each Operation when this parameter is omitted
section.
Example
Display the current status of the power saving schedule and the dates and times the power
saving schedule has been enabled.
> show power-control schedule 090501
Date 2009/04/01(Wed) 20:30:01 UTC
Current Schedule Status : Enable <- Current status
Schedule Power Control Date : <- Schedules from the specified date is displayed.
2009/05/01(Fri) 00:00 UTC - 2009/05/01(Fri) 06:00 UTC
2009/05/01(Fri) 20:00 UTC - 2009/05/04(Mon) 06:00 UTC
2009/05/04(Mon) 20:00 UTC - 2009/05/05(Tue) 06:00 UTC
2009/05/05(Tue) 20:00 UTC - 2009/05/06(Wed) 06:00 UTC
2009/05/06(Wed) 20:00 UTC - 2009/05/07(Thu) 06:00 UTC
2009/05/07(Thu) 20:00 UTC - 2009/05/08(Fri) 06:00 UTC
>