Specifications

set power-control schedule
96
set power-control schedule
Sets the startup mode for power saving schedule.
Syntax
set power-control schedule {enable | disable}
Input mode
User mode and administrator mode
Parameters
{ enable | disable }
Sets the startup mode for power saving schedule.
enable
Sets schedule-enabled mode.
disable
Sets schedule-disabled mode.
Operation when this parameter is omitted:
This parameter cannot be omitted.
Example
Set schedule-disabled mode.
> set power-control schedule disable
>
Display items
None
Impact on communication
None
Response messages
Table 8-1 List of response messages output by the set power-control schedule command
Message Description
Can't execute. The command could not be executed. Re-execute the
command.
Notes
None