Specifications

backup
91
Copy file to MC...
Backup information success!
Example 3 [AX1250S][AX1240S]
Save the current device information in AX1230 series switch file format to the
MCBackup.dat file on the memory card.
> enable Press the Enter key.
# backup mc MCBackup.dat no-software AX1230 Press the Enter key.
Backup information to MC (MCBackup.dat).
Copy file to MC...
Backup information success!
Display items
None
Impact on communication
None
Response messages
Table 7-8 List of response messages for the backup command
Message Description
Backup information success! Backup processing ended successfully.
Backup operation failed. Backup processing failed.
MC is not inserted. A memory card was not inserted.
Can't access to MC by write protection. Make sure the memory card's protect switch is not set to
Lock. If the switch is set to Lock, move it to the opposite
side, and then insert the memory card again.
Make sure there is no dust in the memory card slot. If there is
dust, remove it with a dry cloth and then insert the memory card
again.
Not enough space on device. The memory card or RAMDISK
#
capacity is insufficient.
#: When the command is executed, the RAMDISK is used as a
temporary save area. Make sure the RAMDISK is empty. After
deleting directories and files on the RAMDISK, execute the
command again.
Notes
 The device information saved by this command can be restored to the Switch by
using the
restore command.
 Do not allow other users to log in while this command is being executed.
 For a backup, the destination memory card must have free capacity of at least 20
MB.
 Do not remove or insert the memory card while the
backup mc command is backing
up data to the memory card.
 Before backing up the running configuration, use the
copy command to copy it to the
startup configuration file.
 Specify the file name with 64 or fewer characters. If the file name is too long, it will