Specifications

backup
90
backup
Saves information about the running software and device to the memory card. The device
information includes password information and the startup configuration file.
Syntax
backup mc <File name> [no-software] [AX2200S]
backup mc <File name> [no-software] [AX1230] [AX1250S] [AX1240S]
Input mode
Administrator mode
Parameters
mc
Specifies the memory card as the backup destination.
<File name>
Specifies the name of a file at the copy source or copy destination.
Specify the file name with 64 or fewer characters. The file name is not case sensitive.
If a file with the same name already exists at the copy destination, it will be
overwritten.
For the characters that can be specified, see Specifiable values for parameters.
no-software
No software is backed up.
Operation when this parameter is omitted:
Backup, including software information, is performed.
AX1230 [AX1250S][AX1240S]
A backup file that is compatible with AX1230S series switches is created. (The
information that is backed up is device information other than software information.)
For the compatibility of operating information among AX1250S, AX1240S, and
AX1230S series switches, see 10. Device Management in the Configuration Guide
Vol. 1.
Operation when this parameter is omitted:
A backup file is created in AX1250S series switch and AX1240S series switch
file format.
Example 1
Save the current device information to the MCBackup.dat file on the memory card.
> enable Press the Enter key.
# backup mc MCBackup.dat Press the Enter key.
Backup information to MC (MCBackup.dat).
Copy file to MC...
Backup information success!
Example 2
Save the current device information (excluding software information) to the MCBackup.dat
file on the memory card.
> enable Press the Enter key.
# backup mc MCBackup.dat no-software Press the Enter key.
Backup information to MC (MCBackup.dat).