Specifications

reload
86
reload
Restarts the switch.
Syntax
reload [-f]
Input mode
User mode and administrator mode
Parameters
-f
Executes the command without displaying a confirmation message.
Operation when this parameter is omitted:
A confirmation message is displayed.
Example
1. Restarts the switch.
> reload Press the Enter key.
2. Display a confirmation message when the reload command is started.
Restart OK?(y/n):_
If y is entered, the device is restarted. If n is entered, restarting is canceled.
Display items
None
Impact on communication
Communication is interrupted while the device is being restarted
Response messages
Table 7-5 List of response messages for the reload command
Message Description
CAUTION!!! "running-config" is not saved!!! Caution: The running-config setting was not saved.
CAUTION!!! "line console speed" is not saved!!! Caution: The line console speed setting was not
saved.
CAUTION!!! "trace-monitor" is not saved!!! Caution: The trace-monitor setting was not saved.
CAUTION!!! "set terminal pager" is not saved!!! Caution: The set terminal pager setting was not
saved.
CAUTION!!! "set exec-timeout" is not saved!!! Caution: The set exec-timeout setting was not
saved.