Specifications

show environment
83
Figure 7-4 Operating condition level and temperature [AX2200S]
Figure 7-5 Operating condition level and temperature [AX1250]
Figure 7-6 Operating condition level and temperature [AX1240]
#3
When the configuration has not been set up yet, or when the temperature monitoring
functionality does not work about 60 minutes after the device started,
-/- appears.
#4
If the <temperature> parameter setting is omitted, the default average temperature
appears.
When the configuration has not been set up yet, or the temperature logging data has
not been collected for a day long, the following is displayed:
Temperature-warning-level average status : -/- degrees C period - day(s)
#5
When it is less than the number of days set, the number of days used for the
calculation is displayed.
- is displayed in any of the following cases.
#6
The cumulative operating time information in internal flash memory is updated every
six hours. Therefore, if the operating time is less than six hours, the information in
internal flash memory is not updated and the operating time recorded in internal flash
memory will not be correct.
At power-up (cumulative operating time = 0)