User's Manual

OPEN
OPEN
GS002BLE
Bluetooth 4.0 G-sensor:
Select where
to wear
User Guide for GS002BLE
G-sensor
OPEN
OPEN
How to replace battery:
Step 1: Gently push the recess slot on both sides of the battery back cover with two fingers. Turn counter-clockwise toward point A to open the back
cover.
Step 2: Carefully take out the battery and water-resisting ring located in the recess slot along the upper edge of the back cover.
Step 3: Place a new battery (positive pole facing upward) and water-resisting ring back to their original location.
Step 4: Align the round point on the battery back cover with point A to pull the cover on. Turn clockwise toward point B to lock and fix the back cover.
+
OPEN
OPEN
+
Front side Front side after assembly Rear side after assemblyRear side Fixing bracket
1
Point A
Point B
2 3 4
Instructions on using the Bluetooth 4.0
G-sensor
GS002BLE for sports calculates numbers of steps, speed, total steps walked, total distance walked, etc.The app from ALATECH that complements the
pedometer effectively manages your sporting activities.
Bluetooth 4.0 G-sensor
(GS002BLE)
• This product is suitable for ALATECH
app and other apps that support
Bluetooth Smart (BLE 4.0).
• Please go to Apple iTune to download
the free ALA COACH+ app.
Exterior:
1. The front of GS002BLE is printed with the ALA LOGO while on its back finds a back cover of battery and a fixing bracket.
2. The fixing bracket could be used with shoestrings for sports shoes and can correctly fix position for GS002BLE with light weight and no burden.
Assembly method:
1. Please wear sports shoes that have shoestrings for the ease of fixing GS002BLE.
2. Please place the fixing bracket under the two shoestrings that cross each other.
3. Have the front side of GS002BLE face up and embed its bottom into lower edge of
the fixing bracket.
4. After completing the embedding of the bottom, clip the upper edge downward until
a click sound is heard, to confirm the completion of assembly.
Recommended:
Fix the GS002BLE at the crossing of the two shoestrings so
that the product can be better fixed on the shoes more
securely. Once fixing GS002BLE, check whether it vibrates to
avoid having generated abnormal sports data.
• When matching for the first time or connecting with a bluetooth device, you need to walk or run for about 20 steps to wake GS002BLE.
How to replace battery
Back cover
recess slot
• Follow steps below to replace new battery wheh low battery indicator：
• Be sure to check whether the water-resisting rubber tube (O-ring) is placed inside the recess slot every time
when replacing the battery, to ensure proper functioning of your sensor.
• Battery specification: CR2032.