User's Manual

Alarmster WFH User Manual – EN Rev. 01 © 2020 Bridgesecure Technologies Inc. Page 7 of 10
Test button
1. Shortly press and release the Test / Pair button on the Alarmster WFH. You
should hear 3 short beeps at 3-second intervals signaling testing.
2. Access the Events page and find the Test / Miscellaneous alarm as follows:
3. You may also get a notification of the Test by a phone call, SMS or E-mail if your
own contact is set to receive the System Health category.
Keep-Alive feature
A keep-alive wireless signal is sent twice a day by the Alarmster WFH. If your
Alarmster ONE fails to receive this signal for more than 24 hours, it will send a Loss of
Connection alert to your contacts for which the System Health category is checked.
This makes sure your Alarmster WFH is running and that its wireless connection works
and is in the range of your Alarmster ONE Smart Alarm Central.