Specifications

Appendix
View from
soldering side
23.2 Pin assignment
23.2.1 Signal input
For signal input the socket has the following pin assign-
ment:
4 = reference input + (set value),
6 = reference input - (set value).
Working resistance for current input:
< 150 Q,
Input impedance for voltage input: > 50 kSZ.
23.2.2 Signal output
For signal output the socket has the following pin
assignment:
2
= measuring value + (actual value),
3
= measuring value - (actual value).
Working resistance for current input:
< 500 R,
Output
impedance for voltage input:
> 10 kR.
For the operation of the
circulator with an analog low voltage
normal signal via the
I10 port
you can choose between
1) voltage input,
2) voltage output,
3) current input and
4) current output.
1.e. with this
interface you can
define set values (voltage and current input) and simul-
taneously
show actual values (voltage and current output)
of an external device.