Specifications

Disassembly
21. Disassembly of Temperature Control
Module and Bath Vessel
1
Switch off the unit and pull out the mains plug.
Loosen the 2 crosshead screws right beside the
00 Oo*
.
pump connections.
Slide the metal jacket to the front (slightly bending
may be necessary) and remove
it.
Unscrew the 4 screws. A hexagon socket (10
mm) should be used if the screws are too tightly
tightened.
In case of difficulty loosen the sealing from the
unit with a screw driver.
Incline the unit slightly whilst lifting it.
!
Lift the float to avoid any damage.
-
@ Fix the jacket again with the 2 crosshead screws.