Specifications

Serial lnterface
18.9 Operating status 1 Error message
Call up operating status:
Standard set of commands:
B<cr> or
Extended set of commands: R-BS<cr>
After entering
one of these commands, the following twelve
"state flags" are
shown:
1 : Alarm external Pt100
0 : External Pt100 OK
1 : Alarm internal Pt100
LL o : Internal Ptl 00 OK
-
f : Warning liquid level (only F8/N8)
0 : Liquid level OK
1 : Alarm: Fuzzy control *
0 : Fuzzy control OK
1 : Alarm cooling * *
-
0 : Cooling OK
1 : Alarm via external connection
0 : External connection OK
1 : Alarm motor or pump overloading
0 : Motor and pump OK
1 : Alarm liquid level
0 : Liquid level OK
I : Alarm overtemperature
0 : Temperature OK
1 : Main relay missing
0 : Main relay present
1 : External control
0 : Internal control
1 : Temperature control ON
0 : Temperature control OFF
*)
With the command R-FE the number of the individual
Fuzzy-Error can be read (error list see chapter
15.9)
* *) see next page