Specifications

T-SELECT
IT] SETUP-,
STATUS SETUP-2
Configuration
12. Configuration
Especially when putting into operation for the first time it is
necessary to adjust some parameters.
The menu key is used to open the main menu or to leave
other menus after input.
The enter key is used to confirm a selection.
Use the arrow keys to select the desired menu point.
Select
CONFIG in
the main menu.
Under
CONFIG there
are several submenus.
In the following displays the selected submenu is
shown in the first line.
COMPUTER ANALOG
i
12.1 Interface RS 232C
Select I/O and then COMPUTER (for more information see
chapter
18.).
I COMPUTER 1- 1
24.40°C
DEUTSCH FRANCAIS
12.2 Analog interface (option!)
Select I10 and then ANALOG. This menu point only will be
active in combination with
a built-in 1/0 socket.
This option will be described separately.
12.3 Language
Select SETUP-1 and then LANGUAGE.
Confirm the selected language with
ENTER.