Specifications

Connecting

11.4

Fuses on the unit

All units are equipped with automatic thermally-triggered

fuses.

If the fuse has triggered..

the fuse does not have to be exchanged

resetting suf-

fices;

a white marking is visible;

a certain cooling down time should be allowed (approx.

min) before the (dip) switch can be pressed again.

Do not use tools; do not use force. Both destroy the

fuse.

If the fuse should be triggered again after resetting,

the unit probably has a defect. In this case the unit

should be sent in for servicing.