Specifications

Many units parts can become hot as a result of normal
unit functioning -there is a high risk of burns!
The overall temperature of the marked zone (see fig.)
will become higher than
70°C when the bath tempera-
ture exceeds approx.
150°C. Please ensure that ade-
quate contact protection is provided.
Do not move the unit from the position where it was set
up during operation or when it is still hot. There is a high
risk of burns!
!
Only use the heat transfer liquids recommended by
Thermo Haake. Please refer to the respective
EC Safety
Data Sheet.
!
The temperature controlling i.e. immersing of test
tubes, Erlenmeyer flasks or similar objects directly
within the circulator constitutes normal circulator
practise.
We do not know which substances are contained within
these vessels. Many substances are:
inflammable, easily ignited or explosive
hazardousto health
environmentally unsafe
i.e.: dangerous
You alone are responsible for the handling of these sub-
stances!
Our advice:
If in doubt, consult a safety specialist.
Read the product manufacturer's or supplier's EC
Safety Data Sheet according to directive 91 11 55/EEC.
Read relevant regulations concerning dangerous
materials.
Observe relevant guidelines for laboratories in your
country.