User manual

Model: 2100 &2300 Series
2100UM22.DOC Rev: 2.2
- 12 -
Figure 3.1
3.3 POWERUP DISPLAY
After mechanical and electrical installations of the probe(s) and the controller have been successfully
completed, power up the unit. The following startup screen will be displayed for about 3 seconds:
Arjay Engineering
Level-Ease 2000
Rev: 3.00 / 2057_28
S/N: 001234
The Rev. line displays the Hardware Revision followed by the Software Revision separated with a “/”.
The Serial Number is displayed by itself on the bottom line.
#1 #2 #1 #2
mA OUTSNET 24VDC PROBES
-+ -+-+-++-+-
#1 #2 #1 #2
mA OUTSNET 24VDC PROBES
-+ -+-+-++-+-
All connections are via plug-in
connectors for installation
convenience.
The network connection is
optional for the 2100 & 2200
series and standard on the
2300 & 2400 series models
which require an Arjay Central
Access Panel (CAP) or
Handheld Calibrator for data
access.
To PMC-2000 card in
Arjay level probe head.
Shield connected to - terminal
at 2xxx only - not connected at
PMC-2000
N/C
N/C
+
-
+
-
Isolated mA sourced
output - not loop powered
24VDC power for
DC powered models
+
-
RS-485
Network connection
+
-
Elecinst2k.dsf
HANDHELD CALIBRATOR HOOKUP
+-
HANDHELD CALIBRATOR
Powered by an internal 9V
Battery.
Has Low Battery indication