User guide

P. 6 User Guide AS-2300TW
Example: If the vehicle was programmed with a run time cycle of 15 minutes and the engine
was running (under a remote start) for 5 minutes (meaning there is 10 minutes left in
the run time cycle), LEDs #1 #2 and #3 would light up. LED #3 will turn itself off
when there will be 8 minutes or less left in the run time cycle.
Multi-Level Features (default state)
Basic Features (press the SHIFT button 1X)
SHIFT ¾ LOCK:.......................................................................aux 2
SHIFT ¾ TRUNK:.....................................................................status request
SHIFT ¾ START/STOP............................................................cold weather
Multi-Car Operation (press the SHIFT button 2X)
SHIFT ¾ SHIFT ¾ LOCK:.........................2
nd
car lock
SHIFT ¾ SHIFT ¾ UNLOCK:.....................2
nd
car unlock
SHIFT ¾ SHIFT ¾ START/STOP:...............2
nd
car start/stop
SHIFT ¾ SHIFT ¾ TRUNK:.......................2
nd
car trunk
Customized Features (press the SHIFT button 3X)
(May not be applicable for certain vehicles)
Your installer can add customized features such as turning on the radio, opening sliding doors, etc.
SHIFT ¾ SHIFT ¾ SHIFT ¾ ......................LOCK: customized feature 1
SHIFT ¾ SHIFT ¾ SHIFT ¾ ......................UNLOCK: customized feature 2
SHIFT ¾ SHIFT ¾ SHIFT ¾ ......................TRUNK: customized feature 3
SHIFT ¾ SHIFT ¾ SHIFT ¾ ......................START/STOP: customized feature 4
Setting Transmitter Features (press the SHIFT button 4X)
SHIFT
¾ SHIFT ¾ SHIFT ¾ SHIFT:
LOCK:..............................full beep ...................................................(LED #1 flashes)
UNLOCK:..........................half beep..................................................(LED #2 flashes)
START/STOP:....................disable beep.............................................(LED #4 flashes)
TRUNK:............................save modifications ...................................(LED #3 flashes)
By default, the multi-level features are programmed as follows:
x
x
x
x
x
x
Level 1 (Basic Features)
Level 2 (Multi car operation)
Level 3 (Customized Features)
To access a feature that is programmed as level 1, press the
SHIFT button once followed by the
desired function.
To access a feature that is programmed as level 2, press the
SHIFT button twice followed by the
desired function.
To access a feature that is programmed as level 3, press the
SHIFT button three times followed
by the desired function.
Your installer can customize the system as to personalize these multi-level features in an order that
best suits you. Your options are:
Option 1:
Level 1
(requires pressing the SHIFT button 1X) Æ Multi car operation
Level 2
(requires pressing the SHIFT button 2X) Æ Basic features
Level 3 (requires pressing the SHIFT button 3X) Æ Customized features
Option 2:
Level 1
(requires pressing the SHIFT button 1X) Æ Basic features
Level 2 (requires pressing the SHIFT button 2X) Æ Multi car operation