Installation guide

what is included

■ The control module ■ Two 4-button remote transmitters

■ The plug-in LED system status indicator ■ The plug-in Valet

/Program switch

■ An on-board zone 2 impact sensor ■ A high-powered siren

■ The 12-pin primary harness ■ The 7-pin door lock harness

■ The 3-pin auxiliary harness ■ The plug-in starter interrupt harness

primary harness (H1) wire connection guide

______

This wire supplies (-) ground as long as the system is armed. This output ceases as soon as the system is disarmed. This

wire can be used to turn on an optional sensor or to control an optional accessory, such as a window module or

pager.

H1/1 ORANGE (-) ground-when-armed 500 mA output

RED/WHITE (-) 200 mA CHANNEL 2 VALIDITY OUTPUT

RED (+)12V CONSTANT POWER INPUT

BROWN (+) SIREN OUTPUT

YELLOW (+) IGNITION INPUT, ZONE 5

BLACK (-) CHASSIS GROUND INPUT

VIOLET (+) DOOR TRIGGER INPUT, ZONE 3

BLUE (-) MULTIPLEX TRIGGER INPUT, ZONE 1

GREEN (-) DOOR TRIGGER INPUT, ZONE 3

BLACK/WHITE OUTPUT OF INTERIOR LIGHT ILLUMINATION RELAY #30

WHITE/BLUE (-) 200 mA CHANNEL 3 VALIDITY OUTPUT

WHITE (+/-) SELECTABLE LIGHT FLASH OUTPUT

ORANGE (-) 500 mA GROUND-WHEN-ARMED OUTPUT

H1/1

H1/2

H1/3

H1/4

H1/5

H1/6

H1/7

H1/8

H1/9

H1/10

H1/11

H1/12