Installation guide

© 2003 Directed Electronics, Inc. Vista, CA 27
4. Transmit. While HOLDING the Valet
®
/Program switch, you can select the desired features
setting using the remote transmitter. Pressing the lock icon transmitter button while
HOLDING down the Valet/Program switch will program the feature to the LED ON (default)
setting. The siren will chirp once. Pressing the unlock icon transmitter button while
HOLDING down the Valet/Program switch will change the setting to the LED OFF setting.
The siren will chirp twice.
5. Release. Release the Valet
®
/Program switch.
To access another feature:
You can advance from feature to feature by pressing and releasing the Valet
®
/Program switch the number of times
necessary to get from the feature you just programmed to the feature you wish to access. For example, if you
just programmed Feature 1 and you want to program Feature 2:
1. Release the Valet
®
/Program switch.
2. Press and release the Valet/Program switch once to advance from Feature 1 to Feature 2.
3. Press the Valet
®
/Program switch once more and HOLD it.
4. The siren will chirp two times to confirm that you have accessed Feature 2.
To exit the Code Learning, do one of the following:
■ The doors are closed.
■ Turn the ignition on.
■ No activity for longer than 15 seconds.
■ Press the Valet
®
/Program switch too many times.