Installation guide

This wire supply a (-)200mA output whenever the button(s) controlling channel four is pressed and will continue

until the button(s) is released. This output can be used to control optional accessories.

IMPORTANT! Never use this wire to drive anything but a relay or a low-current input! This

transistorized output can only supply (-)200 mA, and connecting directly to a solenoid, motor, or

other high-current device will cause the module to fail.

NOTE: Many of the options that can be operated with this output require the addition of the relay

accessory package (p/n 8617).

starter interrupt harness (H4) wire connection guide

______

Use one of these wire as a starter interrupt input and the other as a starter interrupt output wire.

NOTE: These two black wires are interchangeable.

H4/1 and H4/2 BLACK starter interrupt wires

BLACK STARTER INTERRUPT OUTPUT

BLACK STARTER INTERRUPT INPUT

H4/1

H4/2

H3/3 VIOLET/BLACK (-) 200 mA channel 4 output