Installation manual

031-171-C0-003 Rev. C 35
24VDC Input
+24VDC Output #1
Enclosure Ground
Bar (24VDC Neg)
Fig. 3-7, 24VDC Connections (RMB-E-911-C)
3.0 Installation, cont.
3.7 24VDC Power Connections (RMB-E-911-C)
24 VDC is distributed through the breaker panel above the DC to DC converter. +24 VDC is available at
the bus bars on either end of the breaker panel. A 24VDC ground is located on the enclosure ground
bar on the right door jam of the enclosure. Refer to the operator’s manual for the Argus DC-to-DC
converter, .
+24VDC Output #2