Installation manual

32 031-171-C0-003 Rev. C
max 8 Nm
123
4
567
89
10
11
The Roxtec block panel is designed to allow rotation, as shown below. It can also be moved to the
opposite side of the enclosure if required by site design.
Torque Specifications
Adhere to the following torque specifications when mounting the Roxtec block to maintain proper
pressure on the rubber sealing gasket: 25 Inch-Pounds (2.83 Newton-Meters)
3.0 Installation, cont.
3.4 Roxtec Panel Assembly Instructions
The illustrations below are a generic overview of the operation of the Roxtec panel. For detailed
instructions, please refer to the manufacturer’s instructions included with the panel.