Installation manual

031-171-C0-003 Rev. C 23
25.82"/65.58cm
25.00"/63.5cm
4.00"/10.16cm
Rear
Front
When placing the pad, allow at least 40” of clearance for the front enclosure door to fully open. The four 1/2”
bolts provided with the frame should remain installed to prevent debris from fouling the threads. See p. 23 for the
location of the riser fastenings within the enclosure.
2.0 Site Preparation, cont.
2.5 Pour-in-Place Pad Frame
Pad Frame Template
The illustration below shows the overall size of the pad frame template for a single MiniBay enclosure.
The actual outer dimensions of the pad will be determined by the customer's requirements.
Fig. 2-4, Pad Frame Template-Single MiniBay (Isometric View)
P/N 604-039-N1-001