Installation manual

16 031-171-C0-003 Rev. C
1.2 RMB-E-911 System Specifications, cont.
1.2.3 RMB-E-911-C
Radium MiniBay RMB-E-911-C Specifications Part Number
Radium MiniBay Equipment Section 44" H X 30" W X 32" D 031-171-22
Weight 498 lbs (222kg) with 60 lbs (27kg) pallet
Swing Rack 19" 745-307-20
MiniBay Skirt/Riser 7" 033-084-20
Dual Term Bar Kit 745-584-20
Ground Bar Kit, 12 X ¼
-
20, 5/8" OC dual hole lug positions w/bolts 745-235-21
Intrusion Sensor Kit for 2 doors 745-232-20
Enclosure Insulation Kit 745-301-20
Cable Entry Port Blank For enclosure bottom cable port 745-201-23
Knockout Panel 3 x 2" conduit knockout, 2 x 1" conduit knockout, 1 x Roxtec CF 16/16 745-580-20
Enclosure Cable Port Blank For enclosure side cable port 745-580-21
Alarm Terminal Interface Board 745-119-20
50-Pair 66-Block (Alarm Terminations) w/covers 745-585-20
Key to enclosure doors Pin Allen type 964-022-10
DC-DC Converter
24V Distribution Option
CS12, DC-DC Converter 48VDC to 24VDC @ 20A, 19" or 23" rack mounting, 1 3/4" spacing 012-012-20-A003
CS12 Integration Kit 875-290-20
Alpha Circuit Breaker Panel 2-position , 19", Horizontal Mounting 744-731-21
10 Amp AM Breaker (Grayson Feeder) 470-051-10
5 Amp Am Breaker 470-050-10-A000
Thermal Mgmt. Option/Doors
Air-conditioned Front or Rear Door, 48VDC, w/speed control and alarm, left hinge (front-mount default if single AC) 745-204-51
Non-louvered Door lift-off (for air-conditioning) 745-207-21
48V Heater Assembly 450W 48VDC 745-588-21
Temperature Sensor Assembly 3/8" lug, 12 feet 028-002-20 L098
Temperature Sensor Assembly 1/4" lug, 12 feet 028-002-20 L099
Replacement Parts and Options
Cable Entry Options/Additions
Battery Compartment Back Door w/3-2" conduit knockouts, 2-1" conduit knockouts, 1 Roxtec CF 16/16 745-210-21
Enclosure side knockout panel w/ 3-2" conduit knockouts, 2-1" conduit knockouts, 1 Roxtec CF 16/16 745-580-20
Blank Panel (side) 745-580-21
Blank Panel (bottom) 745-201-23
Mounting Options
Polymer Concrete Pad Precast for single MiniBay, 3” H X 42” W X 44” D 641-110-10
Hilti HD Kit Sleeve Anchors 4 -12mm HD Sleeve Anchors - Zone 4 00217217 (Hilti) or 745-592-20-001 (Alpha)
Hilti Kit Sleeve Anchors 4 - KBII Sleeve Anchors, 1/2” X 3 3/4” 00045367 (Hilti) or 745-592-21-001 (Alpha)
Pour-in-Place Pad Template
604-039-N1
Vapor Barrier Die cut to enclosure dimensions 564-990-10
48VDC Air Conditioner Assembly Replacement for equipment enclosure 745-289-20