Installation manual

031-171-C0-003 Rev. C 15
1.2 RMB-E-911 System Specifications, cont.
1.2.2 RMB-E-911-B
Radium MiniBay Specifications Part Number
(24V) RMB-E-911-B
Radium MiniBay Equipment Section 44" H X 30" W X 32" D 031-171-22
Weight 515 lbs (234kg) with 60 lbs (27kg) pallet
Swing Rack 19" 745-307-20
Bus bar Kit, isolated, 12 X ¼-20, 5/8" OC dual hole lug positions w/bolts 745-235-20
Ground Bar Kit, 12 X ¼-20, 5/8" OC dual hole lug positions w/bolts 745-235-21
Intrusion Sensor Kit for 2 doors 745-232-20
Cable Entry Seal Kit 745-201-20
Knockout Panel 3 x 2" cond. knockout, 2 x 1" cond. knockout, 1 x Roxtec CF 745-580-20
Enclosure Cable Port Blank 745-580-21
Alarm Terminal Interface Board 745-119-20
50-Pair 66-Block (Alarm Terminations) w/covers 745-585-20
Key to enclosure doors Pin Allen type 964-022-10
Battery Compartment
Battery Storage Unit, 14" H X 32" W X 32" D, Battery Drawer, Removable Rear Panel 033-083-20
Battery compartment fan 24VDC w/thermal control PCBA 745-214-22
Battery Heater Mat 120V 300W 745-322-20
Battery Compartment
Intrusion Sensor 745-231-20
Cable, DC Kit to Battery
Compartment Extension 6 Ga, 75A Anderson to 75A Anderson 875-110-20
Battery Cable Kit, 100A, for 2 GNB 12V, 40 Hr Batteries (1 required per battery string) 745-582-20
AC Input
4-Position 120V/240V AC Dist. Panel, 30 Amp Capacity (requires NEMA 14-30 Input Service/L1, L2, N, G (4-wire) 745-581-20
GFCI outlet w/2
nd
convenience outlet 745-203-20
+24VDC Rectifier
RSM 24/28-Module Cabinet,. 19", Universal Mounting Bracket, Extended Temp Op., etc. 028-006-20-A002
LVD & Load Distribution module uses GMT fuses w/Contactor (2 x 20 Amps) 028-006-20 L76
RSM 24/18 Power Module, 24V 18 Amp Rectifier, 120VAC, Extended Temp 010-532-20 L0, 42, 55, 8
19" RSM 24/18 & 48/10 Integration Kit 2- 19" 1RU air diverters, alarm interface PCBA, 2X 120VAC, 15A Breakers 745-265-23
GMT Fuse 5 Amp 460-084-10
GMT Fuse 10 Amp 460-069-10
Thermal Mgmt. Option/Doors
Air-conditioned Front or Rear Door 24VDC, w/speed control/alarm, left hinge (front-mount default if single AC) 745-204-53
Non-louvered Door, lift-off (for air-conditioning) 745-207-21
Enclosure Heater 450W w/120V Line Cord 745-589-21
Temperature Sensor Assembly 3/8" lug, 12 feet 028-002-20 L098
Temperature Sensor Assembly 1/4" lug, 12 feet 028-002-20 L099
Replacement Parts and Options
Cable Entry Options/Additions
Battery Compartment Back Door w/3-2" conduit knockouts, 2-1" conduit knockouts, 1 Roxtec CF 16/16 745-210-21
Enclosure side knockout panel w/ 3-2" conduit knockouts, 2-1" conduit knockouts, 1 Roxtec CF 16/16 745-580-20
Blank Panel (side) 745-580-21
Blank Panel (bottom) 745-201-23
Mounting Options
Polymer Concrete Pad Precast for single MiniBay, 3” H X 42” W X 44” D 641-110-10
Hilti HD Kit Sleeve Anchors 4 -12mm HD Sleeve Anchors - Zone 4 00217217 (Hilti) or 745-592-20-001 (Alpha)
Hilti Kit Sleeve Anchors 4 - KBII Sleeve Anchors, 1/2” X 3 3/4” 00045367 (Hilti) or 745-592-21-001 (Alpha)
Pour-in-Place Pad Template 604-039-N1
Vapor Barrier Die cut to enclosure dimensions 564-990-10
24VDC Air Conditioner Assembly Replacement for equipment enclosure 745-289-40