Programming instructions

60. Number of Attempts Before Lockout

61. Set the Attempts Lockout Time

• Number of attempts before lockout must be 1-9 attempts.

• The number of attempts is reduced by half every time the keypad is locked out without a

successful code entry (default is 6 attempts).

• The attempt count is reset each time a valid code is entered.

• Lockout Time must be 1-60 seconds.

How long the keypad is locked-out after a series of unsuccessful attempts

(default is 18 seconds).

LOCKOUT

; 6 0 ; [ _ ] :

(Number of Attempts)

; 6 1 ; [ _ _ ] :

(Lockout Time)

Programming Functions (cont'd)

Use Function 67 to program one or more System Options numbered 24-28, detailed below:

; 6 7 ; [ _ _ ] :

(Option Number)

67. Add System Options

SYSTEM OPTIONS

68. Delete All System Options added by Function 67.

; 6 8 ; 0 0 0 :

• 24. ONE TIME ACCESS FOR GROUP 3 USERS - Allows the creation of multiple 'one time only' User Codes. When this feature is

activated, an entry by a Group 3 User will allow entry only once, then the User will become disabled. Note: When the User

Code is entered for the first time and access is granted, the Event Log will read "Entry" followed by "User Disabled". If the User

Code is entered a second time, access will be denied, and the Event Log will read "User Denied Access".

To use this new feature, proceed as follows:

1. Enable the Feature. Enter Program Mode and enter the key sequence ; 6 7 ; 2 4 : .

2. Assign the selected User Codes to Group 3. For example, to assign User Number 15 to Group 3, press: ; 3

5 ; 1 5 ; 3 :.

As with all Function 67 System Options, this feature can be disabled by entering the following key sequence: ; 6

7 ; 0 0 0 :

• 25. DISABLE SOUNDER - Program to turn off the lock sounder. The lock will not sound under any circumstances.

• 26. FIVE (5) SECOND DELAYED ENTRY - Program to add a 5-second pause before unlocking with a valid User Code. Note: This

feature delays User Codes 12 and higher only (except 297, 298 and 299).

• 27. FIFTEEN (15) SECOND DELAYED ENTRY - Program to add a 15-second pause before unlocking with a valid User Code.

Note: This feature delays User Codes 12 and higher only (except 297, 298 and 299).

• 28. FORTY-FIVE (45) SECOND DELAYED ENTRY - Program to add a 45-second pause before unlocking with a valid User Code.

Note: This feature delays User Codes 12 and higher only (except 297, 298 and 299).

NOTE: Enter ; 6 7 ; 0 0 0 : to delete all Features added by Function 67 (identical to Function 68).

Enter ; 6 8 ; 0 0 0 : to delete all System Options added by Function 67.

62-66. Reserved