Programming instructions

Programming One-Button Arming and Pre-Alarm Warning (Location

B17).

Note:

If programming One-Button Arming, do not use any Arm/Disarm Code beginning with

the number “5”.

These two features share a cornmon location (B17). Program as follows:

1. Hold down Key

[8]

until the beep sounds, enter your Arm/Disarm Code within 5 seconds,

then dial location

“B17”.

2. Use Key

[1]

to select the entry for location B17:

Enter

To Program

"1"

One-Button Arming only

“

Pre-Alarm Warning only

“

Both One-Button Arming

and

Pre-Alarm Warning

3. Press Keys [*] and

[#]

simultaneously to exit the Program Mode, then arm and disarm. (If

you cannot arm, see Changing Arm/Disarm Codes 1-4, Step 7.)