CENTER DOOR THICKNESS Ted : HORIZONTAL CENTER LINE OF LEVER DOCK PREPARATION: A. Mark Horizontal Center Line of Lever {at recommended height} on both sides of road. Mark Vertical Center Line of Door edge. Mark Vertical Center Line of Backseat on both sides of door. B. Taps template in position on door, fining up with horizontal and vertical lines. C. Mark all hole centers on each side of door as per template. D. Mortise for lock and lock front in center of door edge as per template. E.
1 ELH (Class Room) | The Key less, Electronic Mortise Locket [LEY MAILER ALARM LOCK SYSTEMS, INC. A division of the NAP CO Security Group | 345 Bay view Avenue, Amiability, NY 11701 (631) 789-4871 1-800-252-5625 Fax: (631) 789-3383 | ©2000, Alarm Lock TRILOGY is a registered trademark of Alarm Lock. TECH SUPPORT: 1-800-ALA-LOCK | Part No.
PREPARING DOOR FOR INSTALLATION REFERENCE: EXPLODED VIEW VERTICAL CENTER HE OF DOOR EDGE 184° OR 00R THICKNESS [82° HORIZONTAL ENTER LINE OF LEVER DOOR PREPARATION: A. Mark Horizontal Enter Line of Lever {at recommended height) on both sides of door, Mark Vertical Center Line of Door edge. Mark Vertical Center Ling of Backseat on both sides of door. B. Tape template in position on door, inning up with horizontal and vertical lines, C. Mark all hole centers on each side of door as per template. D.
