Specifications

Keri Systems, Inc. Doors
TM
Users Guide
01914-002 Rev. 5.5 Section 2: Setup System 2-49
Start Monitor #1, #2, #3
Identifies which of the three definable event monitors an operator may open.
Event Reports
Identifies if an operator is allowed to generate Searchable Event reports (summaries of events that have
occurred on the access control network).
Doors Reports
Identifies if an operator is allowed to generate Formatted reports (pre-programmed reports of controller
events and system parameters).
Launch Backup
Identifies if an operator is allowed to generate Formatted reports (pre-programmed reports of controller
events and system parameters).
Exit Program
Identifies if an operator is allowed to exit the Doors program, returning to the operating system.
NOTE: Exiting the program does not end the access control process. Once all information is entered
and uploaded to all controllers, the controllers manage access by themselves and the Doors program is
only needed for uploading changes to the controllers or for downloading event information from the
controllers, generating event reports, and for real-time event monitoring.
Enroll
Identifies if an operator is allowed to enroll new users.
Show Secondary ID
Identifies if an operator is allowed to