Specifications

Doors
TM
Users Guide Keri Systems, Inc.
2-48 Section 2: Setup System 01914-002 Rev. 5.5
7.2.1 Operator Rights
The following list are the feature operation rights available for assignment to an operator (refer to
Figure 2-52 on page 45 of this section). Each operator must be created and saved, one-at-a-time. There
is a limit of 32 operators that can be assigned. Repeat this process for each operator to be assigned.
Setup Users
Identifies if an operator is allowed to perform the Setup Users commands: enrolling users, entering data,
voiding, deleting, and assigning access groups, or is allowed to have Read Only access to review, but
not change, this information. If Read Only access is selected, the operator will not be allowed to view
Card+PIN information.
Setup System
Identifies if an operator is allowed to perform the Setup System commands: entering or editing the
parameters by which a door/controller operates, or is allowed to have Read Only access to review, but
not change, this information.
Setup Timezones
Identifies if an operator is allowed to perform the Setup Timezone commands: creating or editing
Timezones and Holiday schedules, or is allowed to have Read Only access to review, but not change,
this information.
Setup Access Groups
Identifies if an operator is allowed to perform the Setup Access Group commands: creating or editing
access groups (specifically associating timezones with doors), or is allowed to have Read Only access to
review, but not change, this information.
Setup Monitor
Identifies if an operator is allowed to modify a Monitor window (a window that views events on the
access control network as they happen), or is allowed to have Read Only access to review, but not
change, this information.
Setup Operators
Identifies if an operator is allowed to create new operators.
Setup Video
Identifies if an operator is allowed to enable the video feature.
Operate Doors
Identifies if an operator is allowed to manually lock and unlock doors using program commands and to
perform complete database updates of selected controllers on the access control network.
Output Control
Identifies if an operator is allowed to manually operate output relays (turn them on and off).
Grant Amnesty
Identifies if an operator is allowed to manually grant anti passback amnesty to cardholders.
Start Monitor
Identifies if an operator is allowed to start the event monitoring process.
Stop Monitor
Identifies if an operator is allowed to stop the event monitoring process.