Specifications

Keri Systems, Inc. Doors
TM
Users Guide
01914-002 Rev. 5.5 Section 2: Setup System 2-47
7.2 Creating a New Operator
Depending upon the assignment choice, each Operator assignment is set to one of these three values.
NO
The operator does not have operation rights.
YES
The operator does have operation rights.
Read Only
The operator can view, but not make any changes to this operation.
Do a little planning before assigning operator operation rights.
• determine how many operators are needed to cover operation of the access control system
• consider any time of day and day of the week requirements
• determine the requirements and responsibilities of these operators
• use the following list and determine which operators should have what responsibilities
1. From the Setup Operators window (see Figure 2-52 on page 45 of this section), click in the next
operator slot that is unassigned (there are 32 operator slots).
2. Click in the name cell and assign an operator name.
3. Click in the password cell and enter the operator’s password.
4. Click in the retype password cell and retype the operator’s password.
NOTE: The operator name, password, and retype password fields are all case sensitive. That is, the
program differentiates between UPPERCASE and lowercase in all three fields. Please keep this in mind
when creating operator names and passwords.
5. For each operator option on the screen, click on the cell that corresponds to the operator
responsibilities being granted. The cell changes to . Click on the cell again and it
changes to . Click on the cell one more time and it returns to the original position of
. (For a complete list of operator responsibilities that must be granted, see “Operator
Rights” on page 48.)
6. Once all rights have been assigned, click on the button to save these changes. If the
operator changes are not saved before clicking any other button or exiting the setup operators
window, the data entered is lost and must be re-entered.