Specifications

Keri Systems, Inc. Doors

Users Guide

01914-002 Rev. 5.5 Section 2: Setup System 2-43

5.3 Get Status For One Controller

If work has been performed on one controller in the access control network (such as replacing or

resetting the controller, changing the firmware, or changing the controller’s configuration), that one

controller can be polled for its status. Polling one controller saves time by not polling the status of the

other controllers in the access control network.

1. Click on the Setup ⇒ System pull-down menu or click on the button on the tool bar.

2. Click on the Controller Status tab. The Controller Status window appears (see Figure 2-49).

Figure 2-49: Selecting a Controller

3. Scroll up and down the list of controllers and locate the controller for which status is needed. Click

in the Address cell for that controller (see Figure 2-49).

4. Click on the button. The selected controller is polled for its configuration and status, and

this information is entered into the Controller Status spreadsheet (see Figure 2-50).

Figure 2-50: Received One Controller’s Status

5. Verify the information displayed in the spreadsheet matches the configuration of the controller.

Refer to “Controller Status Fields” on page 39 in this section for explanations of the fields in the

controller status spreadsheet.