Specifications
Doors
TM
Users Guide Keri Systems, Inc.
2-42 Section 2: Setup System 01914-002 Rev. 5.5
5.2 Get Status For All Controllers
1. Click on the Setup ⇒ System pull-down menu or click on the button on the tool bar.
2. Click on the Controller Status tab. The Controller Status window appears (see Figure 2-47).
Figure 2-47: Controller Status Window
3. Click on the button. All controllers are polled for their configuration and status, and this
information is entered into the Controller Status spreadsheet (see Figure 2-48).
Figure 2-48: Received All Controllers’ Status
4. Each line of this spreadsheet corresponds to a controller/door. Verify the information displayed in
the spreadsheet matches the configuration of the installed controllers. The following list describes
the fields in the spreadsheet that should be verified at this time.
NOTE: Status information is at the moment of connection between the host computer and the access
control network. The information is not updated and will remain the same until the next status request.