Specifications

Keri Systems, Inc. Doors
TM
Users Guide
01914-002 Rev. 5.5 Section 2: Setup System 2-41
Door Status
Identifies the status of the door (i.e. open, closed, alarm, held open, forced) at the time controller status
was read.
Door Lock
Identifies the status of the door lock (i.e. locked, unlocked, auto unlocked, time locked/unlocked) at the
time controller status was read.
Door Unlock Time
Identifies the number of seconds a door will be unlocked following a valid access request.
Door Open Time
Identifies the number of seconds a door can be held open before a Door Held Open alarm is generated.
Auto Unlock/Lock Timezone
Identifies the unlock/lock timezone that has been assigned to the door. See “Set an Unlock/Lock Time
Zone” on page 35 in section 3.
Auto Unlock/Lock Status
Identifies the current status of any unlock/lock timezone that has been assigned to the door (Active or
Suspended). A dash in this column means the status was unknown. Check the controller type and prom
version.
First Person In
Identifies the First Person In value that has been assigned to the door. See “First Person In” on
page 36 in section 3.
Door Forced Output
Identifies which output relay will be triggered by a Door Forced event.
Door Held Output
Identifies which output relay will be triggered by a Door Held Open event.
Primary RTE
Identifies how the controller should respond to a primary Request to Exit input signal.
Aux RTE
Identifies how the controller should respond to an auxiliary Request to Exit input signal.