Specifications

Keri Systems, Inc. Doors

Users Guide

01914-002 Rev. 5.5 Section 2: Setup System 2-37

4.0 Network Update

The Doors software needs to download operating parameters to all controllers on the access control

network. The Smart Update command uploads from the host computer to the access control network

only the changes made to the Doors databases since the last update was performed. (For additional

information see “Update and Collect Events from the Controllers” on page 35 in section 5.)

1. Click on the icon on the tool bar. The Update Network window appears. If changes have

been made to the databases and the network needs to be updated, the Update Required field

indicates this with a “Yes”, and the Skip/Update toggle box under the Smart Update Network field

indicates “Update” (see Figure 2-44).

NOTE: When updating a new network for the first time or adding a new controller to an existing

network, a Total Update must be performed on the system. Click on the “Skip” cell in the Total

Update Network column to change the Skip” to a “Yes” then follow the rest of the instructions listed

here.

Figure 2-44: Required Network Update

2. Click on the button to begin Smart Update of the Network.

NOTE: Click on the Cancel All button at any time to stop the update process.

3. Once all parameters are collected, the host computer connects to the access control network (if it

isn’t already connected). The Net Communication window appears if the access control network

connection needs to be made (see Figure 2-45).

Figure 2-45: Connecting to the Network