Specifications

Doors
TM
Users Guide Keri Systems, Inc.
2-32 Section 2: Setup System 01914-002 Rev. 5.5
2.0 Autoconfiguration
The Autoconfiguration command is used to automatically retrieve controller/door configuration
information from the access control network and insert that information into the appropriate controller/
doors databases within the Doors program.
1. Click on the Setup ⇒ System pull-down menu or click on the button on the tool bar.
2. Click on the Controllers tab. The Setup System/Controllers window appears (see Figure 2-2 on
page 3 of this section).
3. Ensure the access control network has been powered on per the instructions in the following
documents:
PXL-250
• PXL-250 Start-Up Checklist (P/N 01852-001)
• PXL-250 Quick Start Guide
(P/N 01835-002)
• PXL-250 Tiger Controller and SB-293 Satellite Board Technical Reference Manual
(P/N 01836-004)
PXL-500
• PXL-500/PXL-510 Quick Start Guide (P/N 01918-001)
EntraGuard Gold
• EntraGuard Gold Quick Start Guide (P/N 01801-001)
4. Click on the button. The Net Communication window appears as communication is being
established (see Figure 2-37).
Figure 2-37: Connecting to the Network
5. Once communication has been established, the Autoconfiguration window appears indicating data
is being transferred to the host computer (see Figure 2-38 on page 33 of this section).