Specifications

Keri Systems, Inc. Doors
TM
Users Guide
01914-002 Rev. 5.5 Section 2: Setup System 2-31
1.3 Save the System Parameters
1. When all information is entered/verified, click on the button and the new configuration
information is saved to a configuration file. If the new system parameters are not saved before
clicking any other button or exiting the setup system parameters window, the data entered is lost
and must be re-entered.
2. The new system parameters should take effect immediately. If they do not, then the Doors program
must be exited and restarted. To exit the Doors program, click on the File ⇒ Exit pull-down menu
option or click in the box in the upper-right corner of the Doors window.
3. If you have not saved the new configuration information, the Data Has Changed warning will
appear (see Figure 2-36).
Figure 2-36: Data Has Changed Warning
4. If you want to close the window without saving the changes, click on the button. If
you want to save the changes before closing, click on the button, then click on the
button.
5. Exit the Doors program and start the Doors program per the instructions in “To Log On the Doors
Program” on page 19 in section 1. The new system parameters now take effect and the program is
ready to communicate with the access control network.