Specifications

Keri Systems, Inc. Doors
TM
Users Guide
01914-002 Rev. 5.5 Section 2: Setup System 2-29
1.2.19 Set Video
See “Visions Digital Video System” on page 1 in section 15 for a complete description of how to
enable, use, and disable the Video feature in Doors.
The Doors Video feature allows for the integration of the Visions Digital Video System and Doors.
Perform the following steps to enable the feature:
The program default is for Video to be OFF.
1. From the System Options tab, click on the button. The System Options
window will reveal the Video field (see Figure 2-34).
Figure 2-34: Video Field
2. To enable use of the Video feature, click on the Video ON check box. When there is a check in the
box, the feature is enabled. To disable this field, click in the check box again and remove the check
mark (this is the default value).
NOTE: A few changes are made to the access control databases when the Video feature is enabled.
These changes add the fields necessary for Doors to communicate with the Visions Server. For
simplicity in explaining the features in the Doors program, the majority of this Users Guide assumes
that the Video feature is not enabled. Video related features are explained in detail in “Visions Digital
Video System” on page 1 in section 15.