Specifications

Doors
TM
Users Guide Keri Systems, Inc.
2-28 Section 2: Setup System 01914-002 Rev. 5.5
1.2.18 Set Dual Verification
See “Dual Verification” on page 1 in section 14 for a complete description of how to enable, use,
and disable the Dual Verification feature in Doors.
The Dual Verification parameter allows an operator to enable the dual verification feature of the Doors
program.
NOTE: Dual Verification is for use with a PXL-500W/PXL-510W only.
The program default is for Dual Verification to be OFF.
1. From the System Options tab, click on the button. The System Options
window will reveal the Dual Verification field (see Figure 2-33).
Figure 2-33: Dual Verification Field
2. If your system is not using Dual Verification, verify there is not a check mark in the Dual
Verification ON box (see Figure 2-33).
3. To enable use of the Dual Verification feature, click in the check box beside the Dual Verification
ON field. When there is a check in the box, the feature is enabled. To disable this field, click in the
check box again and remove the check mark (this is the default value).
NOTE: A few changes are made to the access control databases when the Dual Verification feature is
enabled. These changes add the fields necessary to manage dual verification. For simplicity in
explaining the features in the Doors program, the majority of this Users Guide assumes that the Dual
Verification feature is not enabled. Dual Verification related features are explained in detail in “Dual
Verification” on page 1 in section 14.