Specifications

Keri Systems, Inc. Doors
TM
Users Guide
01914-002 Rev. 5.5 Section 2: Setup System 2-27
Figure 2-31: Temp Users Option Changed - ON
4. Click the button. A “Saved Configuration” window flashes on the screen.
5. Click on the button to save these changes. If the Temp Users changes are not saved before
clicking any other button or exiting the System Options window, the data entered is lost and must
be re-entered.
NOTE: A number of changes are made to the access control databases when the temp users feature is
enabled. These changes add the fields necessary to set future activation and expiration dates. For
simplicity in explaining the features in the Doors program, the majority of this Users Guide assumes
that temp users mode is not enabled. The Temp Users feature is explained in “Temp Users” on page 1 in
section 13.
1.2.17 Disable Temp Users
1. To disable the Temp Users feature, click in the Temp Users ON check box. The check mark that
was there disappears and the following window appears (see Figure 2-32).
Figure 2-32: Temp Users Option Changed - OFF
2. Click the button. A “Saved Configuration” window flashes on the screen.
3. Click on the button to save these changes. If the Temp Users changes are not saved before
clicking any other button or exiting the System Options window, the data entered is lost and must
be re-entered.