Specifications

Doors
TM
Users Guide Keri Systems, Inc.
2-26 Section 2: Setup System 01914-002 Rev. 5.5
1.2.16 Set Temp Users
NOTE: Enabling the Temp Users feature reduces the number of cards/User IDs that can be enrolled
from 65,535 to 19,110.
NOTE: The Temp Users feature is for use on a PXL-500 controller only. Although a combined PXL-500/
PXL-250 network is possible, the Temp Users feature will work only on the PXL-500 controlled doors.
See “Temp Users” on page 1 in section 13 for a complete description of how to enable, use, and disable
the Temp Users feature in Doors.
The Temp Users parameter allows an operator to enable or disable the Temp Users feature of the Doors
program. Enabling the Temp Users feature allows an operator to set a future date and time for activation
and expiration of a credential.
Since enabling the Temp Users feature greatly reduces the number of cards that may be enrolled, the
program default is for Temp Users to be OFF.
1. From the System Options tab, click on the button. The System Options
window will reveal the Temp Users field (see Figure 2-30).
Figure 2-30: Temp Users Field
2. If your application does not use Temp Users, verify there is not a check mark in the Temp Users
ON box. This is the default value (see Figure 2-30).
3. To enable temp users, click in the check box beside the Temp Users ON field. A check mark
appears in the check box and the following window appears (see Figure 2-31 on page 27 of this
section).