Specifications

Keri Systems, Inc. Doors

Users Guide

01914-002 Rev. 5.5 Section 2: Setup System 2-23

Figure 2-26: Card+PIN (P-650) Option Changed Warning - ON

4. Click the button. A “Saved Configuration” window flashes on the screen followed by

an information window regarding the Card+PIN (P-650) feature. After reading the reminder, click

on the button to return to the System Options tab.

5. Click on the button to save these changes. If the Card+PIN (P-650) changes are not saved

before clicking any other button or exiting the System Options window, the data entered is lost and

must be re-entered.

NOTE: The Card+PIN (P-650) column displayed in the User Spreadsheet window will not be visible if

an operator has been given Read Only (RO) rights in the Setup Users category during setup of

operators (see “Setup Operators” on page 45 in this section).

1.2.13 Disable Card+PIN (P-650)

1. To disable the Card+PIN (P-650) feature, click in the Card+PIN (P-650) ON check box. The check

mark that was there disappears and the following window appears (see Figure 2-27).

Figure 2-27: Card+PIN (P-650) Option Changed Warning - OFF

2. Click the button. A “Saved Configuration” window flashes on the screen.

3. Click on the button to save these changes. If the Card+PIN (P-650) changes are not saved

before clicking any other button or exiting the System Options window, the data entered is lost and

must be re-entered.